librosa.display.specshow

librosa.display.specshow(data, *, x_coords=None, y_coords=None, x_axis=None, y_axis=None, sr=22050, hop_length=512, n_fft=None, win_length=None, fmin=None, fmax=None, tempo_min=16, tempo_max=480, tuning=0.0, bins_per_octave=12, key='C:maj', Sa=None, mela=None, thaat=None, auto_aspect=True, htk=False, unicode=True, intervals=None, unison=None, ax=None, **kwargs)[source]

Display a spectrogram/chromagram/cqt/etc.

For a detailed overview of this function, see Using display.specshow

Parameters:
datanp.ndarray [shape=(d, n)]

Matrix to display (e.g., spectrogram)

srnumber > 0 [scalar]

Sample rate used to determine time scale in x-axis.

hop_lengthint > 0 [scalar]

Hop length, also used to determine time scale in x-axis

n_fftint > 0 or None

Number of samples per frame in STFT/spectrogram displays. By default, this will be inferred from the shape of data as 2 * (d - 1). If data was generated using an odd frame length, the correct value can be specified here.

win_lengthint > 0 or None

The number of samples per window. By default, this will be inferred to match n_fft. This is primarily useful for specifying odd window lengths in Fourier tempogram displays.

x_axis, y_axisNone or str

Range for the x- and y-axes.

Valid types are:

  • None, ‘none’, or ‘off’ : no axis decoration is displayed.

Frequency types:

  • ‘linear’, ‘fft’, ‘hz’ : frequency range is determined by the FFT window and sampling rate.

  • ‘log’ : the spectrum is displayed on a log scale.

  • ‘fft_note’: the spectrum is displayed on a log scale with pitches marked.

  • ‘fft_svara’: the spectrum is displayed on a log scale with svara marked.

  • ‘mel’ : frequencies are determined by the mel scale.

  • ‘cqt_hz’ : frequencies are determined by the CQT scale.

  • ‘cqt_note’ : pitches are determined by the CQT scale.

  • ‘cqt_svara’ : like cqt_note but using Hindustani or Carnatic svara

  • ‘vqt_fjs’ : like cqt_note but using Functional Just System (FJS) notation. This requires a just intonation-based variable-Q transform representation.

All frequency types are plotted in units of Hz.

Any spectrogram parameters (hop_length, sr, bins_per_octave, etc.) used to generate the input data should also be provided when calling specshow.

Categorical types:

  • ‘chroma’ : pitches are determined by the chroma filters. Pitch classes are arranged at integer locations (0-11) according to a given key.

  • chroma_h, chroma_c: pitches are determined by chroma filters, and labeled as svara in the Hindustani (chroma_h) or Carnatic (chroma_c) according to a given thaat (Hindustani) or melakarta raga (Carnatic).

  • ‘chroma_fjs’: pitches are determined by chroma filters using just intonation. All pitch classes are annotated.

  • ‘tonnetz’ : axes are labeled by Tonnetz dimensions (0-5)

  • ‘frames’ : markers are shown as frame counts.

Time types:

  • ‘time’markers are shown as milliseconds, seconds, minutes, or hours.

    Values are plotted in units of seconds.

  • ‘h’ : markers are shown as hours, minutes, and seconds.

  • ‘m’ : markers are shown as minutes and seconds.

  • ‘s’ : markers are shown as seconds.

  • ‘ms’ : markers are shown as milliseconds.

  • ‘lag’ : like time, but past the halfway point counts as negative values.

  • ‘lag_h’ : same as lag, but in hours, minutes and seconds.

  • ‘lag_m’ : same as lag, but in minutes and seconds.

  • ‘lag_s’ : same as lag, but in seconds.

  • ‘lag_ms’ : same as lag, but in milliseconds.

Rhythm:

  • ‘tempo’markers are shown as beats-per-minute (BPM)

    using a logarithmic scale. This is useful for visualizing the outputs of feature.tempogram.

  • ‘fourier_tempo’same as ‘tempo’, but used when

    tempograms are calculated in the Frequency domain using feature.fourier_tempogram.

x_coords, y_coordsnp.ndarray [shape=data.shape[0 or 1]]

Optional positioning coordinates of the input data. These can be use to explicitly set the location of each element data[i, j], e.g., for displaying beat-synchronous features in natural time coordinates.

If not provided, they are inferred from x_axis and y_axis.

fminfloat > 0 [scalar] or None

Frequency of the lowest spectrogram bin. Used for Mel, CQT, and VQT scales.

If y_axis is cqt_hz or cqt_note and fmin is not given, it is set by default to note_to_hz('C1').

fmaxfloat > 0 [scalar] or None

Used for setting the Mel frequency scales

tempo_minfloat > 0 [scalar]

Lowest tempo (in beats per minute) for tempogram display.

tempo_maxfloat > 0 [scalar]

Highest tempo (in beats per minute) for tempogram display.

tuningfloat

Tuning deviation from A440, in fractions of a bin.

This is used for CQT frequency scales, so that fmin is adjusted to fmin * 2**(tuning / bins_per_octave).

bins_per_octaveint > 0 [scalar]

Number of bins per octave. Used for CQT frequency scale.

keystr

The reference key to use when using note axes (cqt_note, chroma).

Safloat or int

If using Hindustani or Carnatic svara axis decorations, specify Sa.

For cqt_svara, Sa should be specified as a frequency in Hz.

For chroma_c or chroma_h, Sa should correspond to the position of Sa within the chromagram. If not provided, Sa will default to 0 (equivalent to C)

melastr or int, optional

If using chroma_c or cqt_svara display mode, specify the melakarta raga.

thaatstr, optional

If using chroma_h display mode, specify the parent thaat.

intervalsstr or array of floats in [1, 2), optional

If using an FJS notation (chroma_fjs, vqt_fjs), the interval specification.

See core.interval_frequencies for a description of supported values.

unisonstr, optional

If using an FJS notation (chroma_fjs, vqt_fjs), the pitch name of the unison interval. If not provided, it will be inferred from fmin (for VQT display) or assumed as ‘C’ (for chroma display).

auto_aspectbool

Axes will have ‘equal’ aspect if the horizontal and vertical dimensions cover the same extent and their types match.

To override, set to False.

htkbool

If plotting on a mel frequency axis, specify which version of the mel scale to use.

  • False: use Slaney formula (default)

  • True: use HTK formula

See core.mel_frequencies for more information.

unicodebool

If using note or svara decorations, setting unicode=True will use unicode glyphs for accidentals and octave encoding.

Setting unicode=False will use ASCII glyphs. This can be helpful if your font does not support musical notation symbols.

axmatplotlib.axes.Axes or None

Axes to plot on instead of the default plt.gca().

**kwargsadditional keyword arguments

Arguments passed through to matplotlib.pyplot.pcolormesh.

By default, the following options are set:

  • rasterized=True

  • shading='auto'

  • edgecolors='None'

The cmap option if not provided, is inferred from data automatically. Set cmap=None to use matplotlib’s default colormap.

Returns:
colormeshmatplotlib.collections.QuadMesh

The color mesh object produced by matplotlib.pyplot.pcolormesh

See also

cmap

Automatic colormap detection

matplotlib.pyplot.pcolormesh

Examples

Visualize an STFT power spectrum using default parameters

>>> import matplotlib.pyplot as plt
>>> y, sr = librosa.load(librosa.ex('choice'), duration=15)
>>> fig, ax = plt.subplots(nrows=2, ncols=1, sharex=True)
>>> D = librosa.amplitude_to_db(np.abs(librosa.stft(y)), ref=np.max)
>>> img = librosa.display.specshow(D, y_axis='linear', x_axis='time',
...                                sr=sr, ax=ax[0])
>>> ax[0].set(title='Linear-frequency power spectrogram')
>>> ax[0].label_outer()

Or on a logarithmic scale, and using a larger hop

>>> hop_length = 1024
>>> D = librosa.amplitude_to_db(np.abs(librosa.stft(y, hop_length=hop_length)),
...                             ref=np.max)
>>> librosa.display.specshow(D, y_axis='log', sr=sr, hop_length=hop_length,
...                          x_axis='time', ax=ax[1])
>>> ax[1].set(title='Log-frequency power spectrogram')
>>> ax[1].label_outer()
>>> fig.colorbar(img, ax=ax, format="%+2.f dB")
../_images/librosa-display-specshow-1.png